SHIPPING INFORMATION
- PAYPAL ONLY
- THE LISTED SHIPPING RATES ARE FOR UNITED-STATES ONLY.
- MOST ORDERS ARE PROCESSED WITHIN 2-3 DAYS.
- FOR INTERNATIONAL SHIPPING OR CUSTOM ORDER CONTACT US.
-

CHAMELEON V4 MULTIBAND HF/VHF
ULTRA - STEALTH VEHICULAR ANTENNA
2M TO 20M (MOBILE)
6M to 80M (PORTABLE DIPOLE - 2 X 25’ WIRES OR 1 X 25’ END FED ANTENNA)
Whether used in the field, on the highway or in and high-density urban areas, the Chameleon V4 always remains stealth and unseen by others. Its ultra slim silhouette offers virtually no wind resistance and will remain stealth. The simple but robust design of the V4 ensures exceptional durability and strong communications capability.
The Chameleon V4 Antenna is a HF/VHF multiband antenna that is made for serious communication. Hermetically sealed the Chameleon V4 covers 2M to 20M mobile and 6M to 80M on a portable dipole configuration with 2 X 25’ wires or with a single 25’ End-Fed wire antenna.CHAMELEON V4 HF/VHF ANTENNA
ELECTRICAL SPECIFICATIONS Frequency:
14 MHz – 300 MHz (Mobile) & 3.5MHz to 54MHz (Portable Dipole or End-Fed) Power: 250 W SSB RF Connection: PL-259 Input Impedance: 50 Ω VSWR: 2.5:1 or better (3.5:0 Between 200 MHz and 300 MHz) Pattern: Omni directional Polarization: Linear vertical Height: 56" Weight: 2 lb. Mounting Configuration: 3/8-24 Thread Mount 
-

CHAMELEON V2L HF/VHF/UHF MULTIBAND ANTENNA
70CM – 80M
NEW
SOLD BY THE MANUFACTURER EXCLUSIVELY
The Chameleon V2L HF/VHF/UHF Multiband Antenna is a hybrid antenna between the Chameleon V1 and the Chameleon V2. Like the V1 the V2L is composed of two individual screw together elements that can be assembled and disassembled in matter of minutes for fast and easy deployment and offers about 50% less wind resistance than the V1 and the V2.
The lower antenna part is 2’ long and it’s made with 3/8” of premium fiberglass tubing while the upper part is made of a 56” long stainless steel whip.
The Chameleon V2L silhouette is slimmer and stealthier than its cousins the V1 and the V2. At 6’6” long the V2L is ideal for smaller vehicles & boats.
An adequate ground-plane system and DC grounding are required for proper antenna performance. The ground plane quality will directly influence the antenna performance especially on 80M and 40M.
An external tuner is required to operate the Chameleon V2L.
Two Chameleon V2L can be added together to create a portable stealth dipole antenna.
The following is included in the package:
1 X Chameleon V2L Antenna
1 X UNUNCHAMELEON V2L HF/VHF/UHF ANTENNA
ELECTRICAL SPECIFICATIONS Frequency:
80M to 6M, 2M, 1.25M, 70CM Power: 250 W SSB RF Connection: PL-259 Input Impedance: 50 Ω VSWR: Subject to Ground-plane Pattern: Omni directional Polarization: Linear vertical Height: 6’6” Weight: 1.5 lb. Mounting Configuration: 3/8-24 Thread Mount 
-

CHAMELEON HF MULTIBAND ZEPP ANTENNA
10M – 80M
NEW
SOLD BY THE MANUFACTURER EXCLUSIVELY
MANUFACTURER EBAY SELLER IS CHAMELEONWALKER
The Chameleon HF Multiband Zepp Antenna has been specially designed for apartments, condominiums, homeowners associations, deed restrictions and CCRs (Covenants, Conditions & Restrictions), ARES, RACES, MARS, EMCOMM, NVIS, First Responders, Emergency Preparedness and attic antenna installation. It’s a true base station or portable stealth antenna.
The antenna is 75’ long and covers 10M to 80M. The Zepp is composed of a 25' matching section and a 50' radiator. To eliminate possible RFI the antenna is attached to a UNUN 1:1. The antenna can directly be connected on an external antenna tuner with the provided 1’ jumper cable (RG-8X) (recommended). A maximum of 100’ of low loss coax cable such as RG-8X can also be added.
A more horizontal configuration of the Zepp antenna will be good for local communications (NVIS from 0 – 400 miles) on 40M (day – evening) and 80M (night). A vertical installation will provide a horizontal polarization and will benefit long-range communications on 40M and below.
To maximize long distance communications such as DX contacts it is preferable to have a nice line of sight with the horizon. It is also very important to avoid any metallic surfaces to get in contact with the 50’ radiator.
The antenna can be installed in different configurations such as:- Vertical
- Horizontal
- Sloped
- Inverted “L”
- Inverted “U”
- Inverted “V”
- Vertically twisted around a fiberglass mast or wooden core
The inverted “V” and the Sloped configurations are usually the most popular among users.
Setup Examples:
Because of its particular design the Zepp antenna can be installed on the edge of a wooden fence, in a tree, on a house rooftop in a loop pattern, in an attic in a vertical loop pattern or twisted around a flagpole.
When rolled in a bundle the antenna can easily fit into a lunch box, backpack, suit case or any other handbags. The deployment time is between 2 minutes to about 10 minutes depending of the chosen antenna configuration.CHAMELEON HF MULTIBAND ZEPP ANTENNA
ELECTRICAL SPECIFICATIONS Frequency:
10M - 80M Power: 600 W SSB RF Connection: PL-259 Input Impedance: 50 Ω VSWR: Subject to configuration Pattern: Subject to configuration Polarization: Linear Height: 75’ (50’ radiator - 25’ matching section) Weight: 2 lb. Mounting Configuration: None 
Balcony installation - Surrounded be 4 buildings of 3 story each -

CHAMELEON V2 HF/VHF/UHF MULTIBAND ANTENNA
The Chameleon V2 HF/VHF/UHF Multiband Antenna is designed for smaller vehicles where the installation of the V1 antenna isn’t appropriate. Made with premium fiberglass tubing, the V2 can handle the stress of mobile operations while providing reliable communication for its length.
Because of its small size (only 4’2” tall) the antenna must be installed as high as possible on the vehicle to maximize wave propagation. The ground plane quality will directly influence the antenna performance especially on 80M and 40M. The V2 antenna requires the installation of the UNUN trans-match to tune adequately from 80M to 10M. When covering 2M, 1.25M and 70CM the UNUN trans-match must be removed for full quality performance.
Because the Chameleon V2 is primarily a HF antenna some antenna installations, locations or mounts might not be suitable for good VHF/UHF performances.
Such as most quarter wave antennas, the V2 requires a good ground plane to perform adequately. For a portable or a base station installation the ground plane can be obtained by a proper arrangement of the provided counterpoises system. For a mobile antenna installation the surface right under the V2 antenna will provide the ground plane needed.
A rule of thumb for vertical antennas less or equal than ¼ wavelength high is that the radius of the conductive plane beneath the antenna should be equal to the height (length) of the antenna. Of course, this rule cannot be followed for most mobile installations but one needs to provide as much ground plane as possible. Therefore, for body mounting the body components need to be bonded together and bonded to the chassis using copper straps. This can be difficult unless the components are already welded together. If the antenna is mounted on the lid of the trunk, the lid should be bonded to the rest of the body. Bare copper braid is best for this since the connection must be flexible.
It is critically important to establish a good mechanical and RF ground connection for all Chameleon Antennas models (as with all vertical antennas). Mobile mounts which are bolted through the vehicle’s roof, or otherwise mechanically affixed, will usually be satisfactory. However, magnetic mounts do not provide the RF grounding necessary for good performance, and are not recommended for use with this antenna. A good RF ground requires a very short, heavy-duty connection between the antenna mount and the chassis or body of the vehicle, and in the case of body mounting the body panels must be bonded to each other and to the chassis to create the maximum ground plane.CHAMELEON V2 HF/VHF/UHF ANTENNA
ELECTRICAL SPECIFICATIONS Frequency:
80M to 6M, 2M, 1.25M, 70CM Power: 250 W SSB RF Connection: PL-259 Input Impedance: 50 Ω VSWR: Subject to Ground-plane Pattern: Omni directional Polarization: Linear vertical Height: 4’2” Weight: 1 lb. Mounting Configuration: 3/8-24 Thread Mount
-

CHAMELEON V1 HF/VHF/UHF MULTIBAND ANTENNA
The Chameleon V1 HF/VHF/UHF Multiband Antenna is a new and formidable antenna that can be used for portable, mobile or base stations. At only 8’4” tall the V1 is composed of two individual screw together elements that can be assembled and disassembled in matter of minutes for fast and easy deployment. Its size is ideal for civil defense, disaster preparedness and general communications. The V1 is the most versatile antenna on the market.
The Chameleon V1 HF/VHF/UHF Multiband Antenna has been proven very efficient and reliable by hundreds of operators and professionals worldwide. A 7.0 magnitude earthquake struck the island nation of Haiti on January 12, 2010 and the V1 was used by operators providing communications support for the volunteers of the Haiti relief efforts. Since then some operators from the Haiti relief efforts consider that the Chameleon V1 HF/VHF/UHF Multiband Antenna should be in everyone’s mobile and portable emergency jump kit.
This quarter wavelength antenna covers the bands from 80M to 6M including MARS/CAP frequencies. Specially designed for HF the Chameleon V1 can also operate 2M, 1.25M, 70CM up to 500MHz including the marine channels with a proper installation and without the UNUN 9:1 (trans-match) installed.
Its slim silhouette and reduced size make the Chameleon V1 the perfect stealth antenna for deed-restricted community. The V1 can be easily mounted on virtually anything with the provided accessories.
Such as most quarter wave antennas, the V1 requires a good ground plane to perform adequately. For a portable or a base station installation the ground plane can be obtained by a proper arrangement of the provided counterpoise system. For a mobile antenna installation the surface right under the V1 antenna will provide the best ground plane.
A rule of thumb for vertical antennas less or equal than ¼ wavelength high is that the radius of the conductive plane beneath the antenna should be equal to the height (length) of the antenna. Of course, this rule cannot be followed for most mobile installations but one needs to provide as much ground plane as possible. Therefore, for body mounting the body components need to be bonded together and bonded to the chassis using copper straps. This can be difficult unless the components are already welded together. If the antenna is mounted on the lid of the trunk, the lid should be bonded to the rest of the body. Bare copper braid is best for this since the connection must be flexible.
It is critically important to establish a good mechanical and RF ground connection for all Chameleon Antennas models (as with all vertical antennas). Mobile mounts which are bolted through the vehicle’s roof, or otherwise mechanically affixed, will usually be satisfactory. However, magnetic mounts do not provide the RF grounding necessary for good performance, and are not recommended for use with this antenna. A good RF ground requires a very short, heavy-duty connection between the antenna mount and the chassis or body of the vehicle, and in the case of body mounting the body panels must be bonded to each other and to the chassis to create the maximum ground plane.
At 8’4” long the Chameleon V1 Antenna requires a stainless steel heavy-duty coil spring when installed for mobile to prevent any breakages and damages that could occur to the antenna mount and the vehicle.
The V1 is perfect for QRP and low power operations when only 1W to 20W is available. For base station or when more power is needed the Chameleon V1 can handle up to 500W SSB.
The Chameleon V1 HF/VHF/UHF Multiband Antenna is also NVIS capable.CHAMELEON V1 HF/VHF/UHF ANTENNA
ELECTRICAL SPECIFICATIONS Frequency:
80M to 6M, 2M, 1.25M, 70CM + MARS/CAP Power: 500 W SSB RF Connection: PL-259 Input Impedance: 50 Ω VSWR: Subject to Ground-plane Pattern: Omni directional Polarization: Linear vertical Height: 8’4” Weight: 2.5 lb. (V1 Kit 3 lb.) Mounting Configuration: 3/8-24 Thread Mount
Chameleon V1 HF/VHF/UHF Multiband Antenna Accessories Kit- 1 X 3/8-24 Mount Bar
- 1 X C Clamp 2"
- 4 X 25 Feet Counterpoise wires with 3/8" Ring Tongues for portable use
- 4 X 8” Steel Tent Stakes to hold the Counterpoise
- 2 X Clip-On Ferrite Beads
- 1 X CHAMELEON V1 HF/VHF/UHF Multiband Antenna™
- 1 X UNUN

-

Chameleon 13’ Heavy Duty Air Cushioned Antenna Stand
Thirteen-foot heavy duty telescoping air-cushioned stand. Constructed from heavy gauge aluminum, with a black anodized finish and rubber grip feet.
4 sections
Closed Height: 3.7'
Lowest Height Use: 4.2'
Weight: 5 lb.
-

Chameleon Antenna Heavy Duty Specially Designed Carrying Bag **
Made with durable vinyl-backed polyester
Over-the-Shoulder bag
3 reinforced pockets
Slip resistant shoulder pad
Draw string top
Double layered, padded bottom
Antennas protecting sleeve
** The bag comes empty.
-

Chameleon Antenna Dipole Mount with Integrated Trans-Match (CADMIT)
The Chameleon Antenna Mount with Integrated Trans-Match has been designed specially to optimize the Chameleon dipole V11 and V12 for HF bands. The aluminum angle mount bar can easily be used for a vertical or horizontal dipole configuration.
-

Chameleon Dipole Jaw Mount
The Chameleon Dipole Jaw Mount has been assembled to offer portable antenna versatility for Chameleon Antenna owners. The mount orientation can easily be changed with a simple 3/16 Allen Key. The mount can also be used for NVIS antenna configuration.

-

-

CHAMELEON MIL WHIP ANTENNA
NEW
MANUFACTURER EBAY SELLER IS CHAMELEONWALKER
The Chameleon MIL (military) Antenna is the best portable whip antenna on the market. Its design has been borrowed from similar antennas utilized by many armies all over the world. The MIL is very hardy, sturdy and portable (being collapsible). The MIL is offered as an optional accessory for the following antennas (will only cover 6M & 10M if used alone with a tuner):
Chameleon V1
Chameleon V2L
Chameleon V3
Chameleon V4
Chameleon HYBRID
If utilized with the Chameleon HYBRID, the MIL will cover 6M to 160M at a power rate of 1500W SSB. Used in the field or as a stationary mobile configuration the Chameleon MIL will increase the communication capacity and efficiency with great ease. Unmounted the entire antenna length is less than 29”. The 5 aluminum sections are hold together by a piece of 1/8th inch US GI MIL SPEC shock cord that can be replaced by the operator if necessary. But its 85% elongation and break point of 95 pounds properties make the 1/8th inch US GI MIL SPEC shock cord the best on the market.
THE CHAMELEON MIL WHIP ANTENNA CAN ONLY BE USED AS PORTABLE OR IN A SEMI-PERMANENT INSTALLATION. NEVER USE IT MOBILE WHILE IN MOTION.
Contrarily to other manufacturers the Chameleon MIL Whip Antenna has no brass components. When brass is utilized with aluminum “electrolyze” could happen and deteriorate antenna strength and performance over time.
Features
Quality, precision, and strength deliver lightweight, optimal performance.
High strength, Aerospace 7075 alloy
Scratch-resistant hard-anodized surface
Colors: black
Connectors: Stainless SteelMSRP: $75 MIL WHIP ANTENNACHAMELEON
ELECTRICAL SPECIFICATIONS Frequency:
6M - 160M (Variable) Power: 1500W SSB RF Connection: 3/8-24 Thread Mount Input Impedance: 50 Ω VSWR: Subject to configuration Pattern: Omni DIrectional Polarization: Linear Height: 10’8” or 130” (5 Sections) Weight: 1 lb. Mounting Configuration: TBA 

-

COUNTERPOISES SYSTEM KIT
The counterpoises system kit can be used by any Chameleon Antenna systems for portable installation to enhance the performance.
The kit contains 4 tent stakes and 4 wires (18 gauge) of various length ranging between 20' to 25' long. Each wire is wound around a wire winder for easy deployment and storage.
-

CHAMELEON HYBRID SERIES
NEW
SOLD BY THE MANUFACTURER EXCLUSIVELY
MANUFACTURER EBAY SELLER IS CHAMELEONWALKER
The Chameleon HYBRID Series is the next generation of Chameleon Antenna. This new generation of antennas and accessories will be fully compatible with almost any previous and future products.
The Chameleon HYBRID design revolves around a specially designed antenna base: the Chameleon HYBRID Base. This special base offers instantaneous bandwidth performance from 6M to 160M which will depend of the selected antenna configuration. The base is mainly designed to fulfill multiple tasks, enhance performances of the antenna system and facilitate antenna installations. It also has an integral broadband impedance matching allowing broadband waveforms to be utilized even after the addition of higher power amplifiers up to 1500W SSB.
With the help of accessories (which are sold separately) the HYBRID base can be converted into four (4) different antenna configuration types:
1 - END FED ANTENNA (Base kit provided with each HYBRID at purchase)
The HYBRID End Fed antenna configuration covers 160 to 6 meters without any gaps including WARC Bands, MARS/CAP, 60 meters, etc… The HYBRID End Fed is perfect for apartments, condominiums, homeowners associations, deed restrictions and CCRs (Covenants, Conditions & Restrictions), First Responders, Emergency Preparedness, attic antenna installation, back packers, RV antenna, field day operation, portable installation, stationary vehicular installation, sail boats and many more. The biggest advantages of the End Fed configuration is that the HYBRID doesn't required any ground connection for great performance. The configuration types for the End Fed HYBRID are numerous: vertical, sloper, horizontal, inverted "L", inverted "V", zig-zagged, etc...MSRP: $225 ELECTRICAL SPECIFICATIONS
Frequency:
6M - 160M Power: 1500 W SSB RF Connection: SO-239 Input Impedance: 50 Ω VSWR: Subject to configuration Pattern: Subject to configuration Polarization: Linear Height: 30’ Weight: 3 Lb. Mounting Configuration: 3/8-24 Thread 

